| Condition-based Maintenance or Predictive Maintenance What ever you call it, FPA is here to help you to start a program or just do more with what you have. |
Downtime kills your profits faster than almost any other type of loss.
Failure Prevention Associates (FPA) helps you avoid unplanned downtime and other types of
avoidable losses.
Now you can have the knowledge of what and when critical assets need maintenance actions.
Being able to know which piece of equipment is having trouble weeks, months or years before
it is obvious saves money and time, but more importantly knowing what part needs repair
places you in control over your equipment. That amount of knowledge gives piece of mind.
Using condition-based monitoring tools turns most maintenance actions into simple repairs.
Versus what happens when the entire machine fails and collateral damage occurs. Massive
failures routinely cost 3 to 20 times more than a planned repair since you now have lost
production profits, operator time costs and collateral damage added to the failure. And lets not
forget Mr. Murphy, he will make sure overtime costs are high since many machines seem to fail
after 3 pm on Fridays, Holidays and weekends.
Predictive Maintenance (PdM) tools, condition detection tools are the services we offer to stop
or reduce failure downtime and waste. If you need or want analysis of findings, certification
training and consulting, we also provide those services.
A line call or other type of emergency notice for immediate repair is a stress that does not have
to be foremost in your mind.
Life is different when you know that your pumps, motors, gears, belts, turbines, fuses, switch
gear, fans, etc. are working as they should, are getting ill or are about to fail. Knowledge puts
you in control to plan appropriate work.
Being able to plan a repair job with weeks of advanced notice will decrease the time & cost of
that job. With our tools you will know which system is worst off and needs a repair. Now you
can plan to have all of the parts, tools and experienced crew at the time and date you choose.
Having the correct tools will allow you to begin or expand your program of condition based
monitoring. Knowing what your tool is telling you is where training or consulting help you to
extend the life-cycle of your equipment.
Failure Prevention Associates (FPA) is here to provide you with the knowledge, tools and
training to start or expand your PdM program today. Many complimentary tools exist to help
you know the condition of your equipment.
See descriptions of our Tools & Services on the links below.
Click on the links below to find out more about our line of tools.
Failure Prevention Associates (FPA) helps you avoid unplanned downtime and other types of
avoidable losses.
Now you can have the knowledge of what and when critical assets need maintenance actions.
Being able to know which piece of equipment is having trouble weeks, months or years before
it is obvious saves money and time, but more importantly knowing what part needs repair
places you in control over your equipment. That amount of knowledge gives piece of mind.
Using condition-based monitoring tools turns most maintenance actions into simple repairs.
Versus what happens when the entire machine fails and collateral damage occurs. Massive
failures routinely cost 3 to 20 times more than a planned repair since you now have lost
production profits, operator time costs and collateral damage added to the failure. And lets not
forget Mr. Murphy, he will make sure overtime costs are high since many machines seem to fail
after 3 pm on Fridays, Holidays and weekends.
Predictive Maintenance (PdM) tools, condition detection tools are the services we offer to stop
or reduce failure downtime and waste. If you need or want analysis of findings, certification
training and consulting, we also provide those services.
A line call or other type of emergency notice for immediate repair is a stress that does not have
to be foremost in your mind.
Life is different when you know that your pumps, motors, gears, belts, turbines, fuses, switch
gear, fans, etc. are working as they should, are getting ill or are about to fail. Knowledge puts
you in control to plan appropriate work.
Being able to plan a repair job with weeks of advanced notice will decrease the time & cost of
that job. With our tools you will know which system is worst off and needs a repair. Now you
can plan to have all of the parts, tools and experienced crew at the time and date you choose.
Having the correct tools will allow you to begin or expand your program of condition based
monitoring. Knowing what your tool is telling you is where training or consulting help you to
extend the life-cycle of your equipment.
Failure Prevention Associates (FPA) is here to provide you with the knowledge, tools and
training to start or expand your PdM program today. Many complimentary tools exist to help
you know the condition of your equipment.
See descriptions of our Tools & Services on the links below.
Click on the links below to find out more about our line of tools.
Failure Prevention Associates "Giving you the knowledge to make uptime, all the time" |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
© 2009 Copyright by Failure Prevention Associates. All rights reserved. Datastick Systems, Inc.© Patents pending. Datastick is a registered
trademark and VSA, Datastick Connection, DirectZoom, SiteConnex, and Datastick Reporting System are trademarks of Datastick Systems, Inc.
Palm and Treo, are among the trademarks or registered trademarks owned by or licensed to Palm, Inc. Palm OS and Palm Powered are trademarks
or registered trademarks of Palm Trademark Holding Company and are licensed exclusively to ACCESS Systems Americas, Inc. (formerly
PalmSource, Inc.). Microsoft, Windows, Windows Mobile, Windows XP, Windows Vista, Microsoft Office, and Excel are trademarks or registered
trademarks of Microsoft Corporation. ICP® is a registered trademark of PCB Group, Inc., Depew, New York. iPAQ© 2008 is owned by
Hewlett-Packard (HP) Development Company, L.P. Shaft Hog, Belt Hog and Fixture laser are trademarks or registered trademarks of VibrAlign Inc.
SDT, SDT170 is a trademark or registered trademark of SDT North America. CTC is a trademark or registered trademark of Connection
Technology Center, Inc. ICI, ToughCam, DuraCam & 7320 NanoCam are trademarks or registered trademarks of Infrared Cameras, Inc. Animation
of Ball Bearing made by PlusMinus (http://en.wikipedia.org/wiki/Image:BallBearing.gif), Web Hosting by Yahoo.
trademark and VSA, Datastick Connection, DirectZoom, SiteConnex, and Datastick Reporting System are trademarks of Datastick Systems, Inc.
Palm and Treo, are among the trademarks or registered trademarks owned by or licensed to Palm, Inc. Palm OS and Palm Powered are trademarks
or registered trademarks of Palm Trademark Holding Company and are licensed exclusively to ACCESS Systems Americas, Inc. (formerly
PalmSource, Inc.). Microsoft, Windows, Windows Mobile, Windows XP, Windows Vista, Microsoft Office, and Excel are trademarks or registered
trademarks of Microsoft Corporation. ICP® is a registered trademark of PCB Group, Inc., Depew, New York. iPAQ© 2008 is owned by
Hewlett-Packard (HP) Development Company, L.P. Shaft Hog, Belt Hog and Fixture laser are trademarks or registered trademarks of VibrAlign Inc.
SDT, SDT170 is a trademark or registered trademark of SDT North America. CTC is a trademark or registered trademark of Connection
Technology Center, Inc. ICI, ToughCam, DuraCam & 7320 NanoCam are trademarks or registered trademarks of Infrared Cameras, Inc. Animation
of Ball Bearing made by PlusMinus (http://en.wikipedia.org/wiki/Image:BallBearing.gif), Web Hosting by Yahoo.
| Call Us Today! Karl Hoffower 408-891-5830 Josh Mininger 408-310-6093 Mike Earls 559-289-8061 Rodger Warner 408-266-2228 Nate Herrell 408-472-5600 Fax: 866-441-2759 1346 The Alameda, Suite 7-181 San Jose, CA 95126-5006 |
